01.01
Filtration, clarification & desalination
Brackish and seawater Reverse Osmosis, high-performance media skids, Water Softening Plants (WSP) and Electrodeionization (EDI) for ultra-pure process water.
Products & Solutions
Capital assets,
engineered to duty.
Treatment systems, structural frameworks, custom installations and permanent infrastructure. Every specification below is a decision we make against your influent, your consent conditions and your site — never against a catalogue.
- Solution groups
- 03
- Process technologies
- 12
- Storage classes
- 05
- Sectors served
- 09
01
Water & Wastewater Treatment
SolutionsComplete treatment trains for municipal and industrial duty — engineered around your actual influent characteristics, discharge consent and reuse targets, not a catalogue page.
01.02
Sewage & effluent treatment
Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) and Common Effluent Treatment Plants (CETP) built on MBBR, SBR and MBR biological platforms.
01.03
Zero Liquid Discharge (ZLD)
Multi-Effect Evaporators (MEE), Mechanical Vapour Recompression (MVR) and Agitated Thin Film Dryers (ATFD) driving complete moisture removal to crystalline solid output.
01.04
Water supply & distribution
Intake wells, pump houses, transmission mains, Water Treatment Plants (WTP), Overhead Reservoirs (OHR) and trenchless pipeline methodology for constrained corridors.
01.05
Monitoring & automation
Custom PLC/SCADA control panels, centralized telemetry and real-time tracking of pH, TDS, turbidity, flow and residual chlorine — with online consent reporting.
Zero Liquid Discharge, done properly
ZLD is where most treatment schemes quietly fail — not on day one, but on the energy bill and the scaling behaviour eighteen months later. We size evaporation around the actual salt load, recover heat where the duty cycle justifies it, and design the crystallizer and dryer stages so the solid output is genuinely handleable. MEE, MVR and ATFD are tools, not a specification.
Discuss a ZLD scheme 02
Engineering & Architectural Construction
SolutionsStructural civil delivery across commercial, institutional, industrial and residential assets — from deep foundations through to finished interiors.
02.01
Commercial & institutional
Turnkey civil execution for corporate parks, retail facilities, campuses, and heavy structural Pre-Engineered Buildings (PEB).
02.02
Residential & townships
Multi-storey RCC frames, shear wall construction and monolithic formwork integration for gated communities and housing developments.
02.03
Civil infrastructure & utilities
Deep foundations, boundary protection, stormwater drainage, municipal sewage grids, CC roads, pathways, culverts and bridges.
02.04
Water management works
Large civil storage reservoirs, engineered rainwater harvesting, and automated irrigation infrastructure.
02.05
Architectural redesign & structure
Space planning, load-bearing structural alteration and full regulatory compliance for change-of-use and expansion.
02.06
Interiors, finishes & smart systems
Imported stone and artisanal wall treatments, custom joinery, multi-zone climate and acoustic engineering, and integrated building automation.
03
Industrial Storage Solutions
SolutionsStorage is a materials-science decision before it is a volume decision. We specify the vessel to the fluid, the duty cycle and the site — then build it.
03.01 Al–Zn–Si coated steel
Zincalume storage tanks
Steel coated in an aluminium–zinc–silicon alloy for high corrosion resistance and long service life. Suited to bulk water storage, firewater reserves and industrial raw water.
03.02 Carbon steel + epoxy
MS epoxy-coated systems
Carbon steel with heavy-duty epoxy resin lining as a barrier against chemical attack. Suited to wastewater treatment, chemical storage and dry bulk material.
03.03 Bulk solids · gravity discharge
Industrial silos
Vertical bulk structures for cement, grain, mineral powders and plastic pellets, engineered for efficient gravity discharge and controlled aeration.
03.04 FRP composite
FRP tanks & vessels
Fibreglass Reinforced Plastic composites resistant to aggressive chemicals, acids and weathering. Suited to chemical processing, desalination and sewage treatment.
03.05 SS304 / SS316 + PUF
SS PUF-insulated tanks
SS304/SS316 stainless steel wrapped in polyurethane foam insulation for temperature maintenance and hygienic storage in dairy, food & beverage, pharmaceutical and brewery duty.
04
Technology matrix
ProcessThe process platforms we design, build and operate. Selection is driven by influent characteristics, discharge consent, footprint and whole-life operating cost — in that order.
- MBR Membrane Bioreactor
- MBBR Moving Bed Biofilm Reactor
- SBR Sequencing Batch Reactor
- AOP Advanced Oxidation Process
- RO/NF Reverse Osmosis / Nanofiltration
- EDI Electrodeionization
- GAC/PAC Activated Carbon Adsorption
- WSP Water Softening Plant
- MEE Multi-Effect Evaporator
- MVR Mechanical Vapour Recompression
- ATFD Agitated Thin Film Dryer
- UV/O₃ UV & Ozone Disinfection
05
Deployed across
Markets- 01
Urban Infrastructure
Municipal water, sewerage & civic assets
- 02
Advanced Technology Facilities
Ultra-pure water & controlled environments
- 03
Oil, Gas & Hydrocarbon
Produced water, effluent & storage systems
- 04
Metals & Minerals
Process water, tailings & dust suppression
- 05
Power
DM water, cooling circuits & ash handling
- 06
Industries
ETP, CETP, recovery & reuse
- 07
Institutions
Campuses, hospitals & public buildings
- 08
Communities
Townships, housing & gated developments
- 09
Water
Supply, treatment, distribution & reuse
Specify with us
Send the analysis.
We'll send the train.
Share your influent analysis, discharge consent or storage duty and we will come back with a process route, an indicative footprint and an honest view of what it costs to run.
- Registered office
- Sector 35B, Chandigarh
- Response time
- Within one working day
- Engagement
- EPC · O&M · AMC · Consultancy